LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> RX-7 Base, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster >> Removal & Installation (RX7)

Removal & Installation (RX7)

  1. Remove steering wheel, column covers and lower cover (if necessary). Remove cluster switch panel screws, and unplug cluster switch panel. Remove self-tapping screws.
  2. Pull instrument cluster far enough from dash to disconnect harness connector and speedometer cable. Remove instrument cluster. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals