LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> Protege LX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Wheel Bearings >> Front (B2600I 4WD)

Front (B2600I 4WD)

  1. Set hub to FREE position. Remove hub bolts. Remove hub as an assembly. Install 2 bolts and nuts to retain hub assembly together. Remove snap ring and spacer. Remove set bolt and plate.
  2. Tighten wheel bearing nut and rotate hub 2-3 times to seat bearings. Loosen wheel bearing nut then tighten by hand. Attach a spring scale to lug bolt. Tighten wheel bearing nut until bearing preload is 1.3-2.6 lbs. (6-12 N). Install set plate and bolt. Install spacer and snap ring. Install hub assembly.
scientia non olet · About LEMON Manuals