LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> Protege 4WD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Rear Disc Brake Caliper (Except 929) >> Disassembly (Except 929)

Disassembly (Except 929)

  1. Remove retainer and dust seal. Remove piston seal and snap ring. Using Brake Piston Wrench (49 FA18 602), turn piston counterclockwise and remove. Remove stopper, "O" ring, adjuster spindle and connecting link.
  2. Remove guide pins and boots. See Figure . Remove spring, nut, spindle lever, boot and bracket. Press needle bearing from housing.
scientia non olet · About LEMON Manuals