LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> MX-5 Miata Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Shoes (All Others) >> Removal (MX-6, Protege, 323 & 626)

Removal (MX-6, Protege, 323 & 626)

  1. Remove brake drum. Remove trailing shoe hold-down spring and pin. Remove trailing shoe assembly.
  2. Remove return spring, anti-rattle spring, and leading shoe hold-down spring and pin. Remove leading shoe assembly. See Figure . Minimum lining thickness is .04" (1 mm).
scientia non olet · About LEMON Manuals