LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 323 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Air Bag Restraint System) >> Removal & Installation >> Crash Sensors >> Removal (Front Impact Sensors)

Removal (Front Impact Sensors)

WARNING: This page is about a different car, the 1991 Mazda RX-7, 1991 Mazda MX-5 Miata, 1990 Mazda RX-7, and 1990 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, follow air bag service precautions. See SERVICE PRECAUTIONS. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Front impact sensors are located in left front and right front of vehicle. See Fig 1 or Fig 2 . To remove left or right sensor, remove wheelwell undercover, and disconnect connector(s). Remove retaining clips and bolts. Remove sensor(s).
Fig 1: Locating Crash Sensors (Miata)
G91E03883Courtesy of MAZDA MOTORS CORP.
Fig 2: Locating Crash Sensors (RX7 Convertible)
G91G03884Courtesy of MAZDA MOTORS CORP.