CLOCKSPRING Connector Assembly: Installation

WARNING: This page is about a different car, the 1991 Mazda RX-7, 1991 Mazda MX-5 Miata, 1990 Mazda RX-7, and 1990 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Before installing steering wheel, center clockspring. See CLOCKSPRING CENTERING under ADJUSTMENTS. Tighten steering wheel nut to specification. See TORQUE SPECIFICATIONS table.
After installing clockspring connector and combination switch assembly, reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG indicator light to ensure system is functioning properly. See SYSTEM OPERATION CHECK.