LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 323 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Air Bag Restraint System) >> Post-Collision Air Bag Safety Inspection

Post-Collision Air Bag Safety Inspection

WARNING: This page is about a different car, the 1991 Mazda RX-7, 1991 Mazda MX-5 Miata, 1990 Mazda RX-7, and 1990 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
POST-COLLISION AIR BAG SAFETY INSPECTION

Replace After Deployment
  • Air Bag Module(s)
  • Clockspring
Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy)
  • Air Bag Diagnosis Control Unit
  • Impact Sensors & Sensors Mountings
  • Steering Column
  • Steering Wheel
  • Wiring Harness
Comments
  • DO NOT  attempt wiring harness repairs. Replace entire wiring harness.
  • Impact sensors must always be installed with arrow on sensor facing front of vehicle.