CLOCKSPRING Centering
WARNING: This page is about a different car, the 1991 Mazda RX-7, 1991 Mazda MX-5 Miata, 1990 Mazda RX-7, and 1990 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Set front wheels in straight-ahead position. Turn clockspring connector clockwise until it stops (do not force). Return connector 2 3/4 turns counterclockwise. Rotate clockspring connector further, if necessary, to align marks on connector and outer housing.