LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 323 SE, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Rotor (Pickup 4WD) >> Removal & Installation (B2600i 4WD)

Removal & Installation (B2600i 4WD)

  1. Remove front caliper. Set hub to FREE position. Remove hub bolts. Remove hub as an assembly. Install 2 bolts and nuts to retain hub assembly together. Remove snap ring and spacer.
  2. Remove set bolt and plate. Remove nut. Remove rotor and hub assembly. Mark rotor-to-hub position. Remove rotor from hub. Machine rotor if lateral runout exceeds specification. Replace rotor if measured thickness is less than specified minimum thickness. See DISC BRAKE SPECIFICATIONS  at end of article. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals