LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1989 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic >> Trouble Shooting >> Self-Diagnostic System >> AAS-6

Self-Diagnostic System: AAS-6

  1. Turn ignition off. Disconnect connectors at rear shock absorber actuators. Turn ignition on. Check voltage between terminal "D" (Black/Red wire) and body ground at each actuator. If approximately 12 volts is not present, replace "POWER WIND" fuse or repair harness between actuator and fuse.
  2. If approximately 12 volts is present, check voltage between ground and remaining actuator terminals. If 12 volts is not present on all terminals, replace defective actuator. If all voltage checks are proper and abnormal pulse is indicated by control unit, replace control unit.
scientia non olet · About LEMON Manuals