LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1989 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic >> Trouble Shooting >> Self-Diagnostic System >> AAS-4

Self-Diagnostic System: AAS-4

  1. Turn ignition off. Disconnect control unit harness. Turn ignition on. Check voltage between body ground and terminals "G" (Black wire), "J" (Black Wire) and "K" (Black/Yellow wire) of control unit harness.
  2. Voltage should be present only on terminal "K". If voltage is present on other terminals, check for short to voltage. If voltage is not present on terminal "K", check/replace "TURN" or "METER" fuse. If wiring is okay, replace control unit.
scientia non olet · About LEMON Manuals