LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1989 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic >> Testing & Diagnosis >> Self-Diagnostic System >> Condition "C"

Condition "C"

Turn ignition on. Change selector switch from "NORMAL" to "SPORT" setting or "SPORT" to "NORMAL" and monitor voltmeter output pattern. A single pulse of the voltmeter needle (each time switch is depressed) indicates normal operation. If voltmeter shows a 4-pulse pattern, check front shock absorber actuators or related wiring harness. See AAS-5 in TROUBLE SHOOTING  . If voltmeter shows a 5-pulse pattern, check rear shock absorber actuators or related wiring harness. See AAS-6 in TROUBLE SHOOTING  . If voltmeter shows a zero-pulse pattern, check selection switch or related harness. See AAS-7 in TROUBLE SHOOTING.

NOTE: A dynamometer may be required for Condition "D" testing.
scientia non olet · About LEMON Manuals