Pedal Height & Stoplight Switch
- Pedal height is measured from firewall to pedal pad center. Loosen lock nut on stoplight switch. Move switch away from pedal. Loosen push rod lock nut. Turn rod until correct pedal height is obtained. See BRAKE PEDAL HEIGHT SPECIFICATIONS table.
- Adjust free play and tighten push rod lock nut. Position stoplight switch so it contacts the pedal and turn an additional 1/2 turn. Tighten stoplight switch lock nut. Connect electrical plug.
- Start engine. Depress brake pedal with 33 lbs. (15 kg) pressure. Measure distance between floor and top of brake pedal. If distance is not as specified, check brake adjustment or air in system.
BRAKE PEDAL HEIGHT SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Pedal Released | ||
| MX-6 & 626 | 8.6-8.9 (218-227) | |
| 929 | 8.0-8.2 (203-208) | |
| Pedal Applied (Minimum) | 3.7 (94) | |