LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1989 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Parking Brake >> MX-6 & 626

MX-6 & 626

  1. Ensure brakes are properly adjusted. Raise and support rear of vehicle. Remove parking brake lever boot or console (if necessary). Release brake lever. Turn adjusting screw or nut to obtain clearance.
  2. Pull lever with 22 lbs. (10 kg) force. Stroke should be as specified. See PARKING BRAKE STROKE table. On models equipped with rear disc brakes, ensure clearance between stopper and lever, at each caliper, is not less than zero clearance.
  3. Install brake lever boot or console. Operate parking brake several times and ensure rear wheels rotate freely. Ensure that rear brakes do not drag, and parking brake warning light is activated when lever is pulled one notch.
scientia non olet · About LEMON Manuals