Line Pressure Test: Preparation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1994 Mazda MX-5 Miata, 1992 Mazda MX-5 Miata, 1992 Mazda MPV, 1992 Mazda B2200, and 1991 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Follow stall speed test preparation. Connect line pressure gauge to pressure ports. See Figure . Place line pressure gauge where it can be read from driver seat. Ensure engine idle speed and ignition timing is correct. See appropriate article in ENGINE PERFORMANCE section.