LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1988 >> 929 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Diagnosis - N4A-El/Hl & NC4A-El) >> Self-Diagnosis (1994 MIATA Only) >> Retrieving Fault Codes >> OEM Tester Hook-Up

OEM Tester Hook-Up

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1994 Mazda MX-5 Miata, 1992 Mazda MX-5 Miata, 1992 Mazda MPV, 1992 Mazda B2200, and 1991 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use manufacturer's instructions on connecting Self-Diagnosis checker and SST, selector and tester harness to vehicle. Connect Self-Diagnosis checker and SST to DLC.
  2. Set system selector system select switch to position 2. Set test switch to SELF TEST position. See Fig 1
Fig 1: Identifying System Selector Switch Positions
G95E19764Courtesy of MAZDA MOTORS CORP.
NOTE: If using aftermarket scan tester, follow manufacturers procedures.
scientia non olet · About LEMON Manuals