LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1988 >> 929 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Diagnosis - N4A-El/Hl & NC4A-El) >> Electrical Component Tests >> Lock-Up Solenoid (NC4A-El) >> Resistance Check

Resistance Check

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1994 Mazda MX-5 Miata, 1992 Mazda MX-5 Miata, 1992 Mazda MPV, 1992 Mazda B2200, and 1991 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect solenoid valve connector. See Figure . Measure resistance between terminals. Resistance should be 13-25 ohms. If not 13-25 ohms, replace solenoid valve.

Fig 1: Checking Lock-Up Solenoid (NC4A-EL)
G93B24100Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals