LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1988 >> 929 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Diagnosis - N4A-El/Hl & NC4A-El) >> Electrical Component Tests >> 4-3 Switch >> Continuity

4-3 Switch: Continuity

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1994 Mazda MX-5 Miata, 1992 Mazda MX-5 Miata, 1992 Mazda MPV, 1992 Mazda B2200, and 1991 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the connector. Check continuity between terminals "A" and "B" when tip of switch is depressed .14-.18" (3.5-4.5 mm). See Figure . If continuity is not present, replace 4-3 switch. If continuity is present, 4-3 switch is okay.

4-3 SWITCH VOLTAGE

Accelerator Pedal Voltage
About 7/8 Depressed About 12
Idle Position-To-5/8 Depressed Below 1.5
scientia non olet · About LEMON Manuals