LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 626 GT, 4D Sedan >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Pads >> Removal & Installation (626)

Removal & Installation (626)

  1. Raise and support the front of vehicle. Remove front wheels. Remove caliper bolts. Remove caliper, but DO NOT disconnect brake line. Remove brake pads.
  2. To install, reverse removal procedure. Before mounting caliper, push piston inward using the Expansion Tool (49 0221 600C).
scientia non olet · About LEMON Manuals