Temperature Gauge
- Remove temperature sending unit wire connector. Connect Red lead of Checker (49 0839 285) to terminal of connector. Connect Black lead of checker to body ground. SeeFig 1 .
- Set checker to test resistance. SeeFig 1 . See TEMPERATURE GAUGE RESISTANCE table. If amount of segments that light up do not agree with resistances set in checker, replace gauge.
TEMPERATURE GAUGE RESISTANCE
| Set Resistance (Ohms) | Number of Segments Lit |
|---|---|
| 183 | Cold |
| 155 | 2 |
| 129 | 3 |
| 92 | 4 |
| 33 | 5 |
| 25.5 | 6 |
| 22.3 | 7 |
| 18.8 | Hot |