LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 323 LX, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Brake Band (2ND Gear) >> 323 (3-Speed F3A)

323 (3-Speed F3A)

  1. Loosen lock nut on brake band anchor bolt while holding anchor bolt stationary. Tighten brake band anchor bolt to 108-132 INCH lbs. (12-15 N.m). See Fig 1.
  2. While holding bolt in this position, back off bolt 2 turns. Hold brake band anchor bolt in this position and tighten lock nut to 41-59 ft. lbs. (56-80 N.m).
Fig 1: Adjusting 323 Brake Band
G82823Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals