LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1986 >> RX-7 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - JATCO E4N71B, JM600, L3N71B & L4N71B >> Component Disassembly & Reassembly >> Oil Pump Assembly >> Reassembly

Oil Pump Assembly: Reassembly

  1. On all models, install lock-up control valve, spring and plug. Install new retaining pin. Ensure valve moves freely in bore. Install inner and outer pump gear. Ensure match marks are aligned.
  2. On L3N71B models, install speed cut valve and lock-up valve.
  3. On all models, reverse removal to complete reassembly.
scientia non olet · About LEMON Manuals