LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1985 >> RX-7 S >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Pads >> Installation

Front Disc Brake Pads: Installation

NOTE: Grease pad mounting support, caliper contact area, and shims with special grease (NLGI No. 2 or equivalent).
  1. To install, reverse removal procedure. Before mounting caliper, push piston inward using the Expansion Tool (49 0221 600C).
  2. After pad installation, depress brake pedal several times to seat pads. Bleed hydraulic system (if required).
scientia non olet · About LEMON Manuals