LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1985 >> RX-7 GSL, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Disc Brake Pads (RX7) >> Installation

Rear Disc Brake Pads (RX7): Installation

  1. Using Brake Piston Wrench (49 FA18 602), turn piston clockwise until piston is inserted into caliper fully.
  2. Position piston so that dowel on pad will seat in piston stopper groove. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals