LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1985 >> RX-7 GSL, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Rotor >> Removal (B2000 & RX7)

Removal (B2000 & RX7)

  1. With caliper assembly removed, remove wheel hub grease cap, cotter pin, lock plate and ring adjusting lock nut.
  2. Remove thrust washer and outer bearing from hub. Slide hub and rotor assembly from spindle. On B2000, place wheel in a soft-jawed vise, scribe match marks, remove bolts attaching rotor to hub, and separate rotor from hub.
scientia non olet · About LEMON Manuals