LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1985 >> RX-7 GSL, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Caliper >> Removal

Front Disc Brake Caliper: Removal

  1. Raise and support front of vehicle. Remove wheel and disconnect brake hose. On RX7, remove lower caliper bolt, lift caliper body, and remove by sliding toward inside of vehicle.
  2. On B2000, remove locking clips, stopper plates, and anti-rattle spring. Lift off caliper. Remove disc pads as previously described.
scientia non olet · About LEMON Manuals