Pedal Height, Free Play & Stop Light Switch
- Pedal height is measured from firewall to pedal pad center.
- On B2000, loosen lock nut on light switch and move switch away from pedal. Loosen lock nut on operating rod and turn rod until correct pedal height is obtained. On all other models, loosen lock nut on stop light switch and turn switch until correct pedal height is obtained. Tighten lock nut and connect electrical connector.
- Pedal free play on B2000 should be .16-.28" (4-7mm). To adjust free play on B2000, adjust light switch, tighten lock nut, and reconnect electrical connector. To adjust on all other models, loosen lock nut on operating rod. Turn rod until correct free play is obtained, and tighten lock nut.
BRAKE PEDAL HEIGHT ADJUSTMENT
| Application | In. (mm) |
|---|---|
| B2000 & 626 | 8.3-8.5 (211-216) |
| RX7 | 7.5-7.7 (191-196) |