Fuel Gauge
Remove connector from fuel gauge sending unit. Attach Yellow wire in series with the resistors specified in FUEL GAUGE RESISTANCE CHECK and ground resistor to body. SeeFigure . Turn ignition on to confirm gauge readings are in the correct segment. If not, replace gauge.
FUEL GAUGE RESISTANCE CHECK
| Number of Segments Lit | Resistor Used |
|---|---|
| 1 | 96 or More Ohms |
| 3 | 56-72 Ohms |
| 5 | 32-40 Ohms |
| 7 | 20-28 Ohms |
| 9 | 8-16 Ohms |
| 10 | Less Than 8 Ohms |