LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1985 >> 626 Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Component Testing >> Fuel Gauge Sending Unit

Fuel Gauge Sending Unit

  1. Remove rear seat and access cover. Disconnect hose and remove fuel gauge sending unit with cover. SeeFigure . Connect an ohmmeter to the fuel tank unit.
  2. Move unit arm slowly through travel range and check resistance. Resistance should be 3 ohms at the full position, 33 ohms at mid-range, and 110 ohms at empty position. If incorrect, replace sender.
scientia non olet · About LEMON Manuals