LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1984 >> B2000 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - JATCO 3N71B, E4N71B, JM600, L3N71B & L4N71B >> On-Vehicle Repairs >> Parking Components >> Removal

Parking Components: Removal

  1. Drain ATF while removing pan. Mark propeller shaft for reassembly reference. Remove propeller shaft. Disconnect speedometer cable from sleeve assembly. Remove sleeve assembly from housing.
  2. Support weight of transmission with jack and wooden block. Remove rear extension housing and rear mount. Remove valve body. Remove parking pawl, pin, spring and washer. Note location for reassembly procedure.
scientia non olet · About LEMON Manuals