LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1983 >> RX-7 GSL, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum - RWD >> Removal & Installation >> Rear Brake Caliper >> Removal (RX7)

Removal (RX7)

  1. Raise and support the rear of the vehicle. Remove the wheel. Disconnect parking brake cable from caliper.
  2. Remove caliper attaching bolt (lower side). Lift up caliper. Slide the caliper toward the inside of the vehicle and remove the caliper. Disconnect the brake hose from the caliper.