LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1983 >> RX-7 GSL, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum - RWD >> Removal & Installation >> Front Disc Brake Caliper >> Removal

Front Disc Brake Caliper: Removal

  1. Raise and support the front of the vehicle. Remove the wheel. Disconnect and plug the fluid line at caliper. On RX7, remove lower caliper bolt, lift the caliper body, and remove by sliding toward the inside of the vehicle.
  2. On GLC Wagon and Pickups, remove locking clips, stopper plates, and anti-rattle spring. Lift off caliper. Remove disc pads as previously described.
scientia non olet · About LEMON Manuals