LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1983 >> GLC Custom, 2D Hatchback, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum - Fwd >> Removal & Installation >> Power Brake Unit >> Removal

Power Brake Unit: Removal

  1. Remove master cylinder from power brake unit before removing power brake unit. Disconnect vacuum line at power brake unit.
    NOTE: On GLC, remove cover under instrument panel. On 626, remove the blower duct.
  2. From inside vehicle, remove cotter pin and clevis pin attaching push rod to brake pedal, and separate.
  3. Remove nuts retaining power unit to firewall. Remove power brake unit and master cylinder as an assembly. Separate master cylinder from power brake unit.
scientia non olet · About LEMON Manuals