LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1983 >> GLC Custom, 2D Hatchback, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum - Fwd >> Removal & Installation >> Front Disc Brake Pads >> Removal

Front Disc Brake Pads: Removal

  1. Raise and support the front of the vehicle. Remove the wheels. Detach brake hose attachment from shock absorber, if necessary.
  2. On 626 and GLC, remove lower caliper guide pin and pivot caliper body up out of way. On GLC Wagon and Pickups remove locking clips and stopper plates.
  3. Remove caliper body and hang from frame with wire. Do not disconnect hydraulic lines. On all models, remove anti-rattle springs (clips), pads, and shims, if equipped.
scientia non olet · About LEMON Manuals