LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1983 >> GLC Custom, 2D Hatchback, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum - Fwd >> Removal & Installation >> Front Disc Brake Pads >> Installation

Front Disc Brake Pads: Installation

  1. To install, reverse removal procedure. Before mounting caliper, loosen bleed screw, and seat piston. Tighten bleed screw.
  2. After pad installation, depress brake pedal several times to seat pads. Bleed hydraulic system, if required.
NOTE: Grease pad mounting support, caliper contact area, and shims with special grease (NLGI No. 2 or equivalent).
scientia non olet · About LEMON Manuals