LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1982 >> RX-7 GS, Standard Trans >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Front Suspension >> Removal & Installation >> Wheel Bearing >> Removal (RWD)

Removal (RWD)

  1. Raise vehicle and support with safety stands. Remove wheel assembly. Remove brake caliper and support out of the way. Remove grease cap, cotter pin, nut lock, adjusting nut and bearing from spindle.
  2. Remove rotor and hub assembly. Remove grease seal and inner bearing. Inspect bearing races for excessive wear or signs of damage. If replacement is required, drive out with drift.
scientia non olet · About LEMON Manuals