LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1982 >> GLC Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 626, GLC & B2000 4-Cylinder >> Camshaft >> Timing Chain & Sprockets >> Removal

Timing Chain & Sprockets: Removal

  1. On FWD models, remove chain adjuster from front cover. On all models, remove cylinder head, oil pan and engine front cover. On RWD models, remove chain adjuster from cylinder block. Loosen chain guide strip screws through access holes in front cover.
  2. On RWD models, remove oil pump driven sprocket and drive chain from pump, then remove pump drive sprocket from crankshaft. Remove crankshaft timing sprocket and chain. On FWD models, remove crankshaft sprocket and timing chain.
scientia non olet · About LEMON Manuals