LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1982 >> GLC Base >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brakes >> Removal & Installation >> Front Disc Brake Rotor >> Removal (GLC FWD)

Removal (GLC FWD)

  1. Raise and support front of vehicle. Remove wheel and tire. Remove lock nut tab. Apply brakes to lock hub and remove drive shaft lock nut.
  2. Separate tie rod end from knuckle. Disconnect brake line from shock absorber.
  3. Remove brake caliper assembly from knuckle and hang out of way. Remove ball joint and knuckle bolts and remove ball joint and knuckle from drive shafts as an assembly.
  4. Separate ball joints from knuckle. Remove wheel hub-to-rotor attaching bolts and using puller, remove rotor.
scientia non olet · About LEMON Manuals