LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1982 >> B2000 Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 626, GLC & B2000 4-Cylinder >> Crankshaft Main & Connecting Rod Bearings >> Connecting Rod Bearings

Connecting Rod Bearings

  1. After ensuring rod caps are marked for cylinder identification, remove rod caps. Use Plastigage method to check for proper clearance.
  2. If not within limits, install new bearings if crankpin is not worn beyond limits.
scientia non olet · About LEMON Manuals