Pedal Height & Free Play
- Pedal height (measured from firewall to pedal pad center) should be as shown in chart. To adjust, disconnect negative battery cable and stop light switch connector.
- Loosen stop light switch lock nut and turn switch until correct pedal height is obtained. Tighten lock nut and connect electrical leads.
- Pedal free play should be 0.28 - 0.35" (7 - 9 mm). To adjust, loosen push rod lock nut and turn push rod until correct free play is obtained. Tighten lock nut.
BRAKE PEDAL HEIGHT ADJUSTMENT
| Application | Height In. (mm) | |
|---|---|---|
| 626 | 7.2-8.2 (193-198) | |
| GLC (FWD) | 8.4-8.6 (210-220) | |
| GLC (RWD) | ||
| Man. Trans | 7.5-7.7 (190-195) | |
| Auto. Trans | 7.7-7.9 (195-200) | |
| RX7 | 7.5-7.7 (190-195) | |
| B2000 | 8.1-8.3 (205-210) | |
| B2200 | 8.1-8.3 (205-210) | |