Fast Idle (Off Car): Subaru

With choke in closed position, place fast idle lever on first (highest) step of fast idle cam. Adjust fast idle screw to obtain throttle plate-to-throttle bore clearance as follows:

Auto. Trans.		.060" (1.5 mm)
Man. Trans.
	Calif.	.052" (1.3 mm)
	Fed. Hatchback, Sedan & Hardtop	.041" (1.1 mm)
	All Others	.050" (1.27 mm)

Fig 1: Fast Idle Bench Adjustment

Courtesy of NOT AVAILABLE

Fig 2: Secondary Throttle Initial Opening Adjustment

Courtesy of NOT AVAILABLE