LEMON Manuals: Even more car manuals for everyone

Home >> Mazda >> 1978 >> Cosmo Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> RX-4 & COSMO Rotary Engine >> Oil Seals >> Corner Seal >> Both Ends of Gauge ("Go" and "No Go") Go in Groove

Both Ends of Gauge ("Go" and "No Go") Go in Groove

Indicates gap exceeds wear limit of 0.0031" (0.8 mm). Replace rotor.

scientia non olet · About LEMON Manuals