Removal (Midget)
- Disconnect battery. Take off heater intake hose. Remove steering column pinch bolt at lower end on column.
- Remove 3 bolts mounting column-to-firewall. Note shim pack located between column mounting and mounting bracket. Remove mounting bolts from bracket. Pull steering column back so cowl clears fascia.
- Remove cowl halves. Remove 2 wiper/washer switch mounting screws and lift up switch. Disconnect electrical wiring at plug. and remove wiper/washer switch.
- Remove 2 turn signal mounting screws. Disconnect electrical wiring. Disconnect electrical lead from horn slip ring terminal. Remove switch.