Removal (MGB)
- Remove steering wheel. Remove steering column cowl:
- Remove 3 screws mounting steering column-to-firewall.
- Remove 3 screws mounting column bracket-to-under dash.
- Note shim pack. Support column and remove 3 screws mounting packing washers.
- Remove cowl halves. Extract light switch from cowl.
- Disconnect multi-connector plugs. Take off tape retaining wires to steering column. Remove 3 wiper/washer switch mounting screws.
- Remove switch clamp screw located behind wiper switch. Lift off turn signal and wiper switch assemblies.