LEMON Manuals: Even more car manuals for everyone
Home >> MG >> 1973 >> Midget Not Available Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Mg Engines - (4 Cylinder) >> 1963-73 Mg Midget 4 Cylinder >> Rocker Arm Assembly >> Removal

Rocker Arm Assembly: Removal

  1. Drain cooling system and remove rocker cover. Loosen rocker shaft bracket nuts and external cylinder head stud nuts gradually, a turn at a time, until all load is released.
    NOTE: It is important that external cylinder head nuts are loosened at the same time to avoid possibility of head distortion.
  2. Remove rocker arm bracket nuts and remove rocker assembly together with brackets. Remove push rods, marking them for replacement in their original positions. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals