R-12, R-15 & R-17 Rear (1971-73)
While rotating hub, torque nut to 25 ft. lbs. (3.455 mkg). Loosen 1/4 of a turn and check end play. End play must be 0.001 - 0.004" (0.025 - 0.101 mm). Adjust nut to set end play to limits and install cotter pin.
While rotating hub, torque nut to 25 ft. lbs. (3.455 mkg). Loosen 1/4 of a turn and check end play. End play must be 0.001 - 0.004" (0.025 - 0.101 mm). Adjust nut to set end play to limits and install cotter pin.