LEMON Manuals: Even more car manuals for everyone

Home >> MG >> 1973 >> Midget Not Available Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Wheel Bearing Adjustment >> Mg >> 1100 & 1300 Rear (1963-67)

1100 & 1300 Rear (1963-67)

Place washer with chamfered edge towards bearings. Install nut and torque to 60 ft. lbs. (8.292 mkg). Align cotter pin hole in spindle with slot in nut. Install cotter pin.

scientia non olet · About LEMON Manuals