240Z, 510, 521, 610, 620 & 1200 (1963-73)
Tighten spindle nut to torque specifications in following table. Spin wheel. Retorque spindle nut. Back off according to specifications in following table and then tighten to align cotter pin hole. Install cotter pin.
WHEEL BEARING ADJUSTMENT
| Application | Torque Ft. Lbs. (mkg) | Loosen |
|---|---|---|
| 240Z | 22-25 (3.04-3.45) | 60° |
| 510 & 610 | 22-25 (3.04-3.45) | 90° |
| 521 & 620 | 23-25 (3.17-3.45) | 40-70° |
| 1200 | 15.9-17.4 (2.19-2.40) | 40-70° |