Piston Rings
When replacing piston rings, note that the second and third compression rings are tapered and marked with letter "T", indicating top of ring. Make sure that ring to groove clearance and end gap are within limits before installing piston rings.
CRANKSHAFT MAIN & CONNECTING ROD BEARINGS
| Engine | MAIN BEARINGS | CONNECTING ROD BEARINGS | |||||
|---|---|---|---|---|---|---|---|
| Journal Diam. In. (mm) | Clearance In. (mm) | Thrust Bearing | Crankshaft End Play In. (mm) | Journal Diam. In. (mm) | Clearance In. (mm) | Side Play In. (mm) | |
| 1963-73 | |||||||
| All Engines | 2.1262-2.1270 (54.01-54.03) | .001-.0027 (.03-.07) | Center | .004-.005 (.10-.13) | 1.8759-1.8764 (47.65-47.66) | .001-.0027 (.03-.07) | .008-.012 (.20-.30) |