LEMON Manuals: Even more car manuals for everyone
Home >> MG >> 1968 >> MGB Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> S.U. Hp & AUF 300, 301, 303, 306 Electric Fuel Pumps >> Overhaul >> Coil To Body Reassembly (Model AUF 300, 301, 303 & 306)

Coil To Body Reassembly (Model AUF 300, 301, 303 & 306)

  1. Position the gasket on the body and carefully place the housing on the gasket and body, lining up the holes.
  2. With the cast lugs on the coil housing at the bottom, install the six screws finger tight. Install the ground screw and connector.
  3. (Roller type) Remove the retaining fork from the rocker assembly. Be sure the brass rollers are correctly positioned. Tighten the screws in diagonal sequence.
scientia non olet · About LEMON Manuals